ติดฟิล์มลามิน่า บูสต์ชีวิตให้เป็น 1 กับโลกดิจิทัล - Boost Up your Life

น้ำยาล้างรถ LLux

LLUX Car Detailing is being recognized and accepted by leading luxury car manufacturers worldwide as the highest quality automotive protection product. And with an incorporated nano-super premium grade innovation, the product helps to clean, protect and prolong the life of both the car exterior and interior from the first application. Product quality is guaranteed by The Ultimate Quality, USA.

WASH & GLOSS
One step wash and gloss products 

The product is formulated with an Advanced Hyper Wash formula and 100% natural extracts, helping to release dirt and grime from the surface and deep spots without harming the paintwork. The product comes with Super Hydro Glass Enhancer, which helps to reinforce the existing coatings layer, deposits a lacquer layer to smoothen the paint surface, as well as repels water and dust. As a result, it returns the bright shining look to your car from the first time of using. The product is suitable for both new and used car as it’s being trusted by car maintenance center worldwide.

How to use the product
1. Shake well before use. 
2. Add 1 oz solution to 5 gallons of water.
3. Dip a sponge in the mixed Wash & Gloss solution, then wipe and clean the surface thoroughly as needed.
4. Rinse using clean water for perfect shine.
5. Wipe dry with a microfiber cloth.

Caution

  • Be careful not to get it in the eyes. Do not eat.

SHIELD GUARD
High Gloss Car Polish: Concentrated Formular

This product comes with the innovation of Nano Sealant Aerospace developed from the United States Aircraft Laboratory. This innovation helps to create a special net-like pattern coating layer attached to the nano-level of car paint, as well as a multipolymer layer that increases the coating resistance against high intensity solar, UV and infrared rays. The product has been tested under extreme hot, humid and cold condition to ensure its durability, long-lasting gloss and high repellence to water and dust.

How to use the product
1. Clean the surface thoroughly before using the product.
2. Shake well before use. 
3. Apply a thin layer of the solution evenly throughout the paint surface and leave it on for about 20 minutes 
(Pour about 5 drops of solution onto the sponge in case of using a polisher).
4. Wipe dry with a premium microfiber cloth for perfect shine.
5. Keep the car away from water for the first 12 hours to allow the solution to fully coat the surface

Cautions

  • Flammable liquids. Be careful not to get it in the eyes. Avoid skin contact. Do not eat or inhale.
  • Spot-testing before full application. 

GLOSS ENHANCING & EXTENDING
Gloss Enhancer Detail Spray for 10 times long-lasting gloss

Introducing SHIELD GUARD, a paint protective gloss enhancement with an innovative Nourishing Nano Ceramic Polymer Coating. This technology helps to maximize paint protection as it allows the sprayed solution to penetrate deep into the nano level of the coating, resulting in an extra smooth candy-gloss barrier repellence to water and dust. The product offers a long-lasting gloss even after driving through harsh conditions or even without frequent cleaning. 

How to use the product
1. Clean the surface thoroughly before applying the product.
2. Shake well and spray the solution on the surface to cover the desired area.
3. Use a microfiber cloth to wipe the surface in the same direction to remove dirt, fingerprints and stains.
4. Use a clean microfiber cloth to wipe the surface again for perfect shine.

Cautions

  • Keep away from children. Be careful not to get it in the eyes. Do not eat or inhale. Avoid skin contact. 
 
 

LEATHER CLEANER
Car Leather Cleaner Spray

This is a gentle and leather-friendly product formulated with the Ultimate Natural PH Pull Stains, a copyright reserved innovation from USA. The product comes with a high cleaning power and a gentle PH Balanced. So, it can remove dirt, filth and deep strain without hard rubbing and hurting the leather. The cream texture of the product will seep in the space between molecules and break down the bonds between the leather surface and the dirt particles, lifting and suspending the dirt such as dust, oil stains, and ink stains to be easily wipe away. The product can be used on all shades of genuine/synthetic leather, car console, and door panel. 

How to use the product
1. Shake well before use. Spray the solution on microfiber cloth.
2. Gently wipe off dirt/strain from the leather seat.
3. In case of fabric car seat, it is recommended to use soft bristles for cleaning.
4. This product should be used in conjunction with a LEATHER CONDITIONER.

Cautions

  • Flammable liquids. Be careful not to get it in the eyes. Avoid skin contact. Do not eat or inhale.

LEATHER CONDITIONER
Restoring Leather Condition Product

This product is designed to restore, protect and keep the leather in new condition. However, it should be used in conjunction with a LEATHER CLEANER. This LEATHER CONDITIONER comes with an innovative Ultimate Natural VitaE+ technology, which makes the product almost as gentle as a premium skincare. The product works to restore moisture, soften the texture, as well as protects the leather from drying and cracking. Plus, it also provides a 100% UV protection. Hence, the leather will always stay soft and smooth.

How to use the product
1. Use after the application of LEATHER CLEANER.
2. Shake well before use. Pour about 5 drops onto a clean sponge or microfiber cloth. Wipe clean in circular on the area of the leather.
3. Leave the product on for 5 – 10 minutes until it is fully dried. Use a microfiber cloth to wipe the surface again.
4. The product can be reapplied as needed.

Cautions

  • Be careful not to get it in the eyes. Do not eat or inhale.

CLEAN MAX

An engine room and tire cleansing production. With a 100% Natural Advanced Deep Cleaning product, it is totally safe for every parts of your car including engine room parts, synthesized parts, plastic , and vinyl. It helps clean coffee stain, wine, animal,feather, oil, dust, and all kinds of deep stain in one step making your car look as bright as a brand new car in a showroom. The product is also dust-proof and can help recover and extend usage life. With is superb performance, it is perfect for all kind of cars.

Product guide
1. Clean and wash your car before using the product. 
2. Mix the product with water in a ratio 1:10 for external use and 1:20 for internal use.
3. Soak sponge or soft brush with the well-mixed Clean Man and apply it to your car.
4. Rinse off using pressured water.
5. Wipe out with a microfiber cloth.

Cautions

  • Keep away from children. Keep away from eyes. Do not consume or smell. In case of allergy, seek for medical help immediately.

GLOW MAX
A coating product for engine bay, tire and synthesis materials.

GLOW MAX comes with an Advanced Deep Gloss Shining innovation. When use in conjunction with CLEAN MAX, the product will provide a long-lasting gloss, protect and prolong the life of external synthesis car accessories as well as parts in the engine bay. Thus, your car will always look beautiful as the product also provides a 100% protection from high-intensity UV and infrared rays.

How to use the product
1. Clean the surface thoroughly.
2. Shake well before use. Spray the solution on the surface as needed and leave it on for about 5 minutes.
3. Wipe dry with a microfiber cloth for perfect shine.
4. The product is for external use only.

Cautions

  • Keep away from children. Be careful not to get it in the eyes. Do not eat or inhale. In case of an irritation,  please immediately see a doctor.
 

GLOSS DETAILER
A transparent detailing spray for glossy film

This wash solution spray is for a glossy paint protection film (PPF) or advertising installed car. The product will help to remove dust and dirt such as tree sap, dried tar and bird droppings from the car surface and keep your car in a beautiful condition. Moreover, it also offers protection against scratches and harmful UV rays, and prolongs the life of the film coat by restoring its gloss. Thus, the film will always look as if it’s just been installed. 

How to use the product
1. Clean the surface before using the product.
2. Shake well before use. Spray the solution thoroughly on the glossy surface of the film, vinyl, or coated advertising stickers (avoid using on heated surface).
3. Use a microfiber cloth to wipe in the same direction to remove dust/dirt, bird droppings, water marks and fingerprints.
4. Use a dry microfiber cloth to wipe clean again as a final step. 
5. To prolong the life of the film, it’s recommend to apply the product every time after washing the car.

Cautions

  • Be careful not to it get in the eyes. Do not eat or inhale.

MATTE DETAILER
A detailing spray for matte film

This wash solution spray is for a matte paint protection film (PPF) installed car. The product will help remove dust and dirt, water strain, tree sap, dried tar and bird droppings from the car surface and keep your car in a beautiful condition. Moreover, it also offers protection against scratches and harmful UV rays, and prolongs the life of the film coat by restoring the its beauty. Thus, the film will always look as if it’s just been installed. 

How to use the product
1. Clean the surface before using the product 
2. Shake well before use. Spray the solution thoroughly on the matte surface of the film, vinyl or coated-stickers (avoid using on heated surface)
3. Use a microfiber cloth to wipe in the same direction to remove dust/dirt, bird droppings, water marks and fingerprints.
4. Use a dry microfiber cloth to wipe clean again as a final step. 
5. To prolong the life of the film, it’s recommend to apply the product every time after washing the car.

Cautions

  • Keep away from children. Be careful not to get it in the eyes. Do not eat or inhale. In case of an irritation,  please immediately see a doctor.

FORCE CUT COMPOUND
A severe defects remover for strengthened paint coating layer

With Multi Nano Hydrocarbon molecules travelling down to the paint layer, the product acts by reducing/ removing deep scratches on the car body without damaging the paint coating layer or its adjacent parts. Force Cut Compound is an abrasive paste, treating deep cut surface and regenerating a smooth glossy paint coating surface back within one complete step. The product’s capability is much more outstanding than a conventional scratch remover cream. You can prove it with your own eyes!

How to use the product
1. Clean the surface thoroughly before using the product.
2. Shake well before use. Pour 3-4 pea-size drops on a hard surface sponge (a wool sponge or a green scrub pads) for maximum effect. 
3. Scrub in a circular manner around the scratched area (polisher can be used). Start with light speed and pressure. Scrub until the cut fades (in case of using a polisher, increase the speed by 10% towards the finishing). It’s recommended to be used in conjunction with LIGHT CUT COMPOUND.
4. In case of using the product on very dry surface, spray a small amount of water before applying the product to avoid a build-up of dust.
5. After polishing the area, you will see a creamy and milky residual, which will fade away, leaving only a thin layer of shinny coat.
6. Use a microfiber cloth to gently and thoroughly wipe clean the surface as a final step. 

Cautions

  • Keep away from children. Be careful not to get it in the eyes. Avoid skin contact. Do not eat or inhale

LIGHT CUT COMPOUND
A light defects remover with wax coating formular. 

With Single Nano Hydrocarbon molecules, the product is designed to remove light scratches and swirl marks on the car body without damaging the paint and the coating layer as it is silicone-free. Light Cut Compound is a correction crème, regenerating a smooth glossy paint coating surface back within one quick step. It is definitely a product superior than a conventional scratch removal cream that usually hurts the paint and makes it difficult to restore. 

How to use the product
1. Clean the surface thoroughly before using the product.
2. Shake well before use. Pour 3-4 pea-size drops on a hard surface sponge (a wool sponge or a green scrub pads) for maximum effect. 
3. Scrub in a circular manner around the scratched area (polisher can be used). Start with light speed and pressure. Scrub until the cut fades (in case of using a polisher, increase the speed by 10% towards the finishing). 
4. After polishing the area, you will see an oily residual, which will fade away, leaving only a thin layer of shinny coat.
5. Use a microfiber cloth to gently and thoroughly wipe clean the surface as a final step.

Cautions

  • Keep away from children. Be careful not to get it in the eyes. Avoid skin contact. Do not eat or inhale.