How to maintain the glass after film installation

After you install the film, you should be careful about window maintenance because once the film is peeling off, you need to go back to fix it. Therefore, after film installation you need to maintain as per following:

1. Normally the film installation need to use mild soap and water solution or film-on to spray over the glue side of the film and the window to adhere the film in place then, use a squeegee to stroke-dry the glass, after installation you may find some haze or condensation which will be fully vanished after 1-4 weeks except L60 Max Special model will be cured within 1-45 days after the film is dry and the glue is fully adhere. Therefore, you should not roll the window during the first 7 days after film installation to avoid film peeling
2. Do not wipe or use glass cleaner inside the car during the first 21 days after installation 
3. Only use clean soft cloth with clean water to wipe the glass after installation
4. Do not wipe or clean inside the car by using the same towel for the car body, cushion or other parts because it may contain some chemicals which can damage the film surface 
5. Do not wipe, rub with a refreshing towel, bristles, washing sponges’ other materials as it could cause damage to the installed film
6. Ammonia based cleaner or other strong cleaning products should be avoided because the glue will be worn out, only clean water shall be used 
7. The film’s edge will be seen if the glass is super curved and may be found more than 1 place in some models
8. After 1-7 days of installation, if you find some bubble but not moisture, please take your car to the station for immediate checking 
9. No need to be worried if you find some haze or condensation, this will be recovered automatically within 1-4 weeks and 4-6 weeks only for L60 max special series 
10. 10. So now, you can make sure that you have high quality of window car film and know how to maintain it properly because to have the correct maintenance since the beginning will help you to keep the film last long to 7-10 years

Source:
1. International Window Film Association Flat Glass Education Guide
2. AIMCAL Energy Management Program Window Film Training Guide
3. Lamina Films Manufacturer
4. Techno-Sell (Frey) Co.,Ltd. The only importer and distributer of Lamina films from the United states of America in Thailand

Lamina Llumar commercial & building window film with UVA & UVB protection, provide all types of window tint film for home owner selection including commercial & building window film , anti-glare building window film and heat rejection building window film, make your house always looked new and nice 

You can visit us to select a car window film, anti-glare window film at 
https://laminafilms.com/ฟิล์มกรองแสงติดรถยนต์

or  shop our commercial & building window film , anti-glare building window film, heat rejection building window film at
https://laminafilms.com/ฟิล์มกรองแสงติดอาคาร

or follow our news at Facebook : https://www.facebook.com/LaminafilmsHQ/

For more information, please contact  0 2885 2500
Call Center 0 2422 2345